Internal Hard Drive Advice

How to Fix a Corrupted Internal Hard Drive

How to Fix a Corrupted Internal Hard Drive

Everyone has important work and personal documents stored on their computer. This information is stored on an internal hard drive, which can sometimes become corrupted.

When the computer crashes due to internal hard drive being damaged or corrupt, it can be a nightmare. There are some signs that always alert the user before a breakdown so you know when to take appropriate action. Fixing a corrupt internal hard drive requires a set pattern to be followed; help is available online or through experienced technicians.

Signs of a corrupted hard drive

Today, practically every activity that we do has some connection with a computer. Ensuring that the computer is always in the best condition is of utmost importance, or else life comes to an absolute halt.

Regulating the computer’s temperature and protecting it from viruses will prevent the internal hard drive from getting corrupted or worse crash.

Losing data on the computer or inefficient functioning of the system can be extremely frustrating. So, how does one know that the computer is misbehaving and the hard drive is corrupted? The following are some of the indicators:

  • The computer slows down considerably
  • The screen hangs or freezes often
  • The screen changes color
  • Files refuse to open
  • Files disappear and reappear
  • Strange sounds
  • The computer shows that there is no free space available on the system
  • The SMART tool within the system indicates that there is something wrong

What to do if your hard drive is corrupted

When you do think that there is something wrong with the system you should start by backing up all the files and documents on the current system.

Backup, as the name suggests, is storing files and other relevant documents either on an external hard drive or any other external computer storage device. This is done to make sure that the documents are safe. This process should be done on a regular basis, as it is difficult to recover files when the internal hard drive is corrupt.

Check to see whether all the internal cables are attached appropriately or need to be rewired or fixed; the three main points are the SATA power connector, the 4-pin Molex power connector and finally the SATA interface cable. Ensure the computer device is not plugged into a system when checking for this.

Once you are satisfied with the basic wiring system, you need to start the computer and run a complete disk check to test the health of the computer and the integrity of the information stored on it.

How to do the checkup

The following steps need to be followed in order to check the proper functioning of the programs:

  • Navigate to My Computer
  • Right click the hard drive icon
  • Select the Properties option
  • Click on Tools
  • Go to Error-checking
  • Select Check Errors, tick both the ‘Check local drive ‘ and ‘Schedule disk check’ when asked.
  • After this, close all the programs and choose the option for check-up to take place automatically on rebooting.
  • Restart
  • The system will start indicating all the corrupt files and programs. Delete the affected files or reinstall them again

What to do if the problem persists and the internal hard drive is totally corrupt

When a problem is detected on the computer that indicates the internal hard drive is completely corrupt, the internal hard drive is usually unscrewed from the computer and tested on another device to check to see if the problem is persists. If the problem occurs on the second device as well, reboot the system and reinstall the OS. This process takes a maximum of about an hour to complete.

The Operating System is preferably available on a DVD; it needs run on the corrupt system and reboot all the programs by entering BIOS and changing the settings in order to format the computer as per requirements.

If you are not particularly well versed in the repair system yourself, there are many tools that are available online that will assist you right from backing up files to suggesting data recovery tools. However, there are always technicians available on call who can fix all computer-related problems.

Internal Hard Drive Speeds

Internal Hard Drive Speeds

Different hard drives have different rates of spin. The faster you want your PC to operate, the faster the hard drive you will need to buy, and you will usually have to pay more for the fastest ones that are currently available in the market.

The current average speed for a desktop hard drive is in the range of 7,200 revolutions per minute (rpm). You can get that rpm right up to the top volume of 4TB.

10,000 rpm hard drives are also available in the market, which are visibly faster but are available in generally smaller capacities (the standard being 1TB) and at a much higher price range. Some ’green’, ’energy-saving’ or ’low-power’ hard drives have even lower spin rates and cost even less.

Need for speed

Yes, the speed of the hard drive is quite important. With modern processors being as fast as they are, every time you have to wait for your computer to do anything it is most likely the hard drive that is holding things up.

It is necessary to understand the fact that there are two separate ways to calculate drive speed. These two ways are access time (the time that is taken to locate a file) and transfer rate (the time taken to read or write the file after it has been located).

For those people who want their computer to boot and start up programs more quickly, the access time happens to be the most important governing factor. The reason for this is that there are a lot of files that have to be located, but they are not very large.


There are in essence three different classes of hard disks:

1. ‘Green’ hard disks use low power and normally spin at 5400rpm and have comparatively slower access times and rates of transfer (most of the laptop drives fall in this category too).

2. Standard drives are those which spin at 7200rpm and have medium levels of speed.

3. High-performance drives have a spin rate of 10,000rpm or more and boast the fastest access times (these drives, however, typically do not have transfer rates which are better than the other drives).

Solid State Disks (SSDs) are the best when it comes to performance. They boast access times that are about a hundred times faster than any other standard hard drive. However, they are much more expensive and have a limited capacity.

Form factor

Most of the desktop hard drives come with a 3.5-inch form factor which causes them to fit easily inside the bays and caddies that are used in most computer cases. However, some of the newer drives use an even tinier 2.5-inch form factor.

The physical size of a drive does not give an indication of its performance. Before buying any drive, check its size in order to make sure that it will fit comfortably in the case.

Some things to consider

If you have got more than one hard drive installed in your system, there should not be any problem with allowing each one to operate independently. Setting them up in a RAID arrangement, however, can provide you with added performance, options and security.

RAID is an acronym for Redundant Array of Independent Disks (alternatively known as Inexpensive Disks). Here you can put together multiple smaller drives to make one big drive called RAID Level 0 or ’striping’. Alternatively, you can create a single ’mirrored’ drive that will offer no additional space but which protects against data loss, or a variety of other combinations.

Most motherboards these days have integrated RAID controllers built in. You can check your system or motherboard manual if you are not sure about your system having one. Weigh up the advantages and reliability versus cost before deciding on any particular system.

The drive or drives that you decide upon will essentially depend on your distinct computing usage and the amount of money you are willing to spend. A good combination is to purchase a moderately sized but fast main drive, or an SSD, and install all of your programs onto that.

Additionally, keep a second, bigger sized hard drive for the purpose of storing your data, even if it has a lower rate of spin. A ’green’ drive should be especially handy in such a case. You can definitely choose SATA drives with 6 GB/s speeds for both uses if your computer can support the technology.

The Art of Removing Shortcut Viruses from an Internal Hard Disk

The Art of Removing Shortcut Viruses from an Internal Hard Disk

The most frustrating thing while working on a computer is when the system starts malfunctioning due to a virus attack. As there are new viruses emerging every day, it is not just enough to have a proper anti-virus system in place; you should run checks from time to time to avoid any sudden disasters from occurring.

How viruses work

Like a medical virus, a computer virus maliciously attacks various programs on the computer, sometimes duplicating or modifying them, causing the computer systems to respond strangely.  Shortcut viruses typically attack the internal hard drive creating shortcuts within the original folders. These folders can be neither opened nor run.

The invisibility cloak

The question most users ask is how this can happen despite having installed an effective anti-virus program. The answer to this question is that there not all anti-virus software are able to detect shortcut viruses. Shortcut viruses typically attack the large folders, often renaming them as well. However, it is not difficult to remove these viruses and try and prevent them from reappearing.

How to detect shortcut viruses

These affected files usually end with the following file extensions:

  • EXE
  • VBS
  • LNK
  • INI

These are usually a combination of Worm and Trojan viruses.

How do systems get affected?

Using corrupt external devices on your system and introducing your system to the virus is the first cause of ‘infection’. Downloading particular files from the internet could also be the cause.

How to prevent shortcut viruses

Method 1

Download a shortcut virus remover tool, for example Trojorm Removal tool. It can be extracted using a file decompressor. Run the tool and enable it to scan. Open the folder using the “open with” option and choose Notepad.

Search for H and edit is accordingly before saving it. Now select “open with” choosing Window Based Script Host. Running this will result in the shortcut viruses disappearing, enabling you to view your files.

Method 2

The second option would be to use the Command Prompt method. This should ideally be used if the first method fails to work effectively. Go to Start, then select Run and type CMD, followed by the letter of the internal hard drive, e.g., G or F. Then type ”attrib g:*.*/d/s-h-r-s” (after attrib the appropriate letter should be typed). The files will now be visible and shortcut viruses will be removed.

Method 3

There are many shortcut virus remover programs available. Some can be purchased and downloaded online or bought in a store in the form a DVD. These programs just have to be run on your computer system and they will clean and remove the shortcut viruses with a few effortless clicks.

Some of the most popular ones that can be used are Short Cut Virus Remover 3.1 and Short Cut Remover BAT. These do not take much space on the system as well.

Un-hiding the folders and files

Once anti-virus systems are used, files may just disappear, causing panic. The following steps can be used to get the ‘lost’ data back. Follow the instructions below in order to retrieve the folders, files and data thought to have been lost in the process:

  • Go to Control Panel, Appearance and Personalization and click on Folder Options
  • Select “Show hidden folders files and drive”
  • Un-tick “hide extensions for known files and hide operating files”
  • The files will appear in a semi-transparent state with appropriate extensions
  • Go to Properties using the right click option
  • Uncheck hidden

The files that were hidden by the virus should appear in their original locations. They can be run and used with ease. All information stored in these folders will be there for you to access. They weren’t removed by the virus at all.

For future prevention

There is always a possibility that the viruses will return and affect your system, but installation of the following software will shield your computer systems from further malicious attacks in the future. In order to preserve and maintain your system a weekly scan with an anti-virus system will help detect any problems that may arise and help take appropriate action.

Some of the software that can be used include HFV, SmadAV and Malwarebytes. They will help to prevent future mishaps from occurring.

How to Retrieve Data from an Old Hard Drive

How to Retrieve Data from an Old Hard Drive

We all have a hard drive or two lying around, containing data from our previous computers that we would like to check before disposing of the disks. But what is the best way to retrieve data from an old hard drive without having to open up your latest computer and installing it inside?

If the components of your old hard drive are still functioning, you can easily retrieve the data yourself. If there is mechanical damage, however, you will need to send it to the experts.

For now, let us take a look at how to get your data back!

Drive crashes

Usually, drive recovery can be a costly and a time-consuming process. Depending on the nature of the file inside the drive and your determination to retrieve them, you can proceed accordingly!

Drive crashes occur in two ways: logical failure and mechanical failure.

Logical failure means your drive’s components are undamaged. But the drive is not able to navigate or find its data due to either a corrupt file system or a mistake in formatting. That means that unless the data was overwritten, your data still exists on that disk.

When your hard drive is prevented from working because it has broken parts, it is known to be suffering from mechanical failure.

Broken drives tend to make a clicking sound when you try to access them. Your data is there, but you will need professional help to retrieve that information!

What different ways are there to retrieve data from old hard drives?

On the motherboard, there are SATA headers. One way is to plug in the old SATA drives there. You can power it from the PSU. It is an effective method, but there are better solutions available.

Another slightly expensive option is a hot swap dock like a USB 3.0 from Anker. But one issue is that docks that support both SATA and IDE connections are not available anymore.

Unless you mainly work with SATA drives, a hot swap dock is not a feasible option for most applications and home users.

Another method is to get a converter/adapter cable. You can connect the HDDs like you are connecting a flash drive or a mobile HDD to your computer.

Traditionally, the adapters were not very reliable. But advancement in Windows and Windows hardware has brought about better functionality at reasonable costs!

You can try the USB 3.0 to IDE/SATA Adapter from Sabrent for the purpose. It is fast, dependable, and conveniently it has a personal Molex transformer to power your drives!

Steps to take for data retrieval

Step 1

The adapter has a side for SATA, 2.5 IDE, and 3.5 IDE. Use the most suitable side of the adapter.

Step 2

In case the hard drive is ancient enough to need the jumper system, ensure that the drive jumpers are set to Master. However, the latest SATA drives rarely use jumpers.

Step 3

Connect the adapter to your computer through a USB port.

Step 4

Get the power after plugging in the Molex adapter.

Step 5

Power the drive by switching on the power.

Once the drive and the computer are powered up, the hard drive should appear on your Windows device as a detachable device like an external drive.

From there you can click on and access all your old files and folders!

Things to Remember

While accessing old folders in your hard drives you might get an error message that says you don’t have permission to access this folder.

This might happen if the folders were created on old Windows systems. Meaning, the access permission is with the old operating system only!

Click on the ‘continue’ option just once and you will be ok.

If that does not solve your problem or you don’t receive this error prompt but instead get a message about an access error, you will need to manually correct the Windows file permissions to retrieve your files.

If you are unable to view the hard drive

There are three reasons why you might not be able to view your drive even when you have connected the data and the power cables properly:

  • Your hard drive is old and you will have to set your jumpers properly.
  • Your Operating System cannot read your drive’s file system.
  • Your hard drive is damaged.

Using the adapter is an easy way to simply connect your old drive. You can check the data, retrieve old files, compare backups, delete the data, or use it—however you want to use the old hard drive.

Transferring Your Data from an Internal Hard Drive to a Laptop

Transferring Your Data from an Internal Hard Drive to a Laptop

Old hard drives can present you with quite a lot of trouble. There is hardly any computer professional or casual laptop owner who does not have a few old hard drives stored away.

Once the time comes to inspect them before disposal, it can present you with a big headache. Sure you can open up your computer casing and hook the drives up with your current existing hardware. However, we like to avoid rummaging around the inside our cases (which risks causing an electrostatic discharge during the process) unless we are doing serious work such as upgrading the components.

That does not mean that plugging in those older SATA drives in the SATA headers present on your motherboard (and drawing a fragment of power out from your PSU) will not work. However, there are much more efficient solutions available these days.

What you will need

As well as more expensive options, you can always get a hot swap dock. The only issue being that nowadays hardly anyone manufactures a dock that supports both SATA and IDE connections. Only if you are doing a good amount of work with the bare SATA drives does the dock make sense. For most home based users, the dock is overkill.

What you need is a converter/adapter cable which allows you to mount the drive like you are just attaching a portable hard drive or flash drive to your computer. In the past, these adapters were not very efficient, but subsequent improvements in both the hardware and Windows itself has resulted in dependable functionality at really affordable prices.

Choosing the right replacement drive

All hard drives are not the same. For instance, if you have an older computer, the connector for the hard drive may not work with the newer hard drive models. Similarly, you will need to make sure that the drive you purchase will fit in a proper manner into your desktop computer bay or laptop.

To figure out what type of drive you need to buy, do a search on the web for your present drive model and manufacturer in order to get the thickness and size as well as the interface (e.g., 2.5-inch, SATA drive with 12.5mm thickness. Most laptops these days use a 2.5-inch drive, but you will want to check by yourself in order to make sure–the information is present upon the drive label itself).

What you need to do

The trickiest part lies in acquiring the hardware. Once you have procured the hardware, you will need to use the suitable side of the adapter (it has a side for SATA, 2.5 IDE, and 3.5 IDE). You need to make sure that the drive jumpers are set to Master (if the drive happens to be old enough to use a jumper system that is, modern SATA drives hardly use jumpers).

You must then plug the adapter into a USB port on your computer, connect the power by means of the Molex unit adapter, and then switch the command cable on to give control to the drive.

As soon as the power is switched on and the drive starts spinning up, it should be visible in Windows as a removable drive in the same manner as a brand new external hard drive would. No separate software or drivers are needed. If you look inside the drive, along with the old Windows desktop drive, you will be able to see all of the old folders. These are easily accessible.

Something that you might face

While opening the folders, especially those folders which are on old hard drives with a previously installed version of Windows, you may be faced with a message telling you that you do not have permission to access the folder.

You will see this error/prompt message when you try to open a folder/file that had file permissions allocated to it by the earlier operating system. However, valid permissions no longer exist for such files/folders. You should only need to click on the “allow access” button just once in most cases.

Leaving this aside, it is as simple as plug and play. By spending a very small amount of money, you now have a trouble-free method to check your drives, retrieve/wipe the old data, compare it with your backups, and interact with the hard drives as if they were mounted right inside the computer case.

How to Use an Internal Hard Drive as an External Hard Drive

How to Use an Internal Hard Drive as an External Hard Drive

It’s almost a year since I upgraded my computer from a desktop to a laptop. As much I was enjoying the experience of computing on the go, I was struggling to find space for all my downloads.

I had explored a number of external hard disc options. All had sufficient storage space to satisfy my need. But they were crazy expensive! And no vendor offered deals on these external hard drives.

That’s when I heard someone remark about turning an internal hard drive into an external. Seriously? Can it be done? That would save me a lot of money and still take care of my large file downloads.

I set out to confirm what I heard. I approached a few computer hardware engineers to help me and this is what they had to say.

Reduce. Reuse. Recycle

Internal hard drives of older computers can indeed be used as a portable storage device. We just have to make sure a few technical specifications are taken care of.

Advantages of the transition

Why should you opt for using an existing internal hard drive?

  • It’s cheaper than the external storage devices available in the market
  • You have control over the driver quality
  • You can retain the existing data without the worries of transferring it to another device
  • You are helping the earth by recycling stuff and reducing your carbon footprint

Specifics matter

You need to plan your purchase before buying it. This is extremely true with storage device purchases especially external storage drives because you won’t be investing in another in the near future. So make sure you prepare a checklist including the following:

  • Determine your file size and utilization
  • Make sure your internal hard drive has reasonably good drive health
  • Know your drive’s form factor – Is it a 3.5” SSD hybrid or a 2.5”SSD or laptop drive? If it’s a 2.5” SSD, then is it 7mm or 9.5mm or 12.5mm in height?
  • Know your drive speed as it determines the wear and tear of your drive. Is it a normal USB 3.0 connection or a higher performance RPM drive?
  • What driver interface does your internal hard drive prefer – PATA or SATA?
  • Decide on the enclosure – plastic or metal, depending on the type and duration of storage device usage
  • Do your external and internal hard drive interfaces match each other?

Assembling your gadgets

Once you’ve got all your specifications for the external portable storage device sorted out and all enclosures and cables have been bought, it’s time to put them all together.

Most enclosures now come tool-less. Therefore, it is easy to mount your internal hard drive into it. These have no screws but rather compact SATA data and power connections. You just need to snap open such an enclosure, slide the internal hard drive with the right face up and snap it close. And your device is ready for use.

If the enclosure has screws, it still is not that difficult. You just have to unscrew the mounting to allow for some space, position the internal drive and secure the screws into place. Now that wasn’t too difficult.

Remember the simple things

Sometimes we get so caught up in the vortex of excitement that we forget a few simple logical things.

When there are numerous versions of hardware available, always opt for the latest and newest version. It is better to shell out an extra few bucks to get an upgraded product rather than settle for a cheaper alternative which you may have to upgrade sooner.

Don’t try to overdo the whole process by trying to transform all the internal hard drives gathering dust at your home. Sit down and take your time to decide which is the best amongst the ones available and how best can it serve you for the next two to three years with all the new enclosures and cables.

Though you may be tempted to opt for a high-performing high-speed drive, it is better to settle for a slower one if you are going to use it continuously. The former holds good if you plan to use the device only for backing up files once or twice a month.

Some older internal hard drives may not support the new hardware options available in the market. It is considered better to leave such outdated products alone than to experiment with them.

Now it’s time to inspect your internal hard drive and assess it for transforming it into a useful external storage device for your laptop.

Top Internal Hard Drive Brands of 2016

Top Internal Hard Drive Brands of 2016

Computers use hard drives or mass storage devices to permanently store data. Digital information is important because it tells the computer what to do; without it, a computer just can’t function. It communicates with the computer by connecting to the motherboard through a hard drive controller which generally acts as an interface from the hard drive to the processor and vice versa.

What the hard drive controller does is basically manage all of the drives that are linked to it and interpret the commands that are sent by the processor then route them to the appropriate hard drive. Hard drives are grouped according to interface and the most common one is the Serial ATA or (SATA).

Compatibility is important, otherwise if a hard drive is connected incorrectly to the hard drive controller, transmission of data from one device to another won’t take place.

Hard drives basically consist of a motor, platter, read and write head, actuator, interface, jumper, and a power supply. Its technical specifications include the capacity, which is the main feature to consider when choosing an internal hard drive. It is the amount of data or digital information that can be stores on a hard drive.

Transfer rate is also a main factor in choosing the right hard drive. It’s basically the amount of data that is being read or written to or from the disk in a certain time frame. Another specification that needs thorough examination is the rotational speed. The platter turns in a counter-clockwise direction and the rotational speed is measured according to the number of the platter’s rotations per minute.

The best hard drives run at a 7,200 RPM or better. The faster it rotates, the faster its transfer rate. Other features that need to be considered are the interface, cache memory, average access time, latency, and more.

With all the products available on the market today, it is very challenging to look for the perfect internal hard drive that will tailor fit all your computing needs. To help you out, here’s a list of the top internal hard drive brands in 2016. These manufacturers produce the best storage devices on the market.


Seagate is one of the top brands for storage devices. It produces a series of hard drive units that perform impressively, considering their respective price points. Seagate is the manufacturer of portable storage devices that have the largest capacity. Its most recent hard drive models even have a personal Cloud service feature.

Most of its products target computer-savvy people who need really huge data storage space. Its main focus is capacity, but it also has also been configured to provide impeccable data transfer performance.


HGST is one of the most reliable companies in the storage device industry. All of its products guarantee excellent performance in both major and minor data storage and file transfer needs. This company has produced a series of top notch quality and innovative storage devices in the hard disk and solid state drives categories.

The company is focused on creating storage devices which are optimized to store, manage, and protect digital information. Aside from the expanded storage capacities, its products are now designed with increased speed and maximum data protection.

Western Digital WD

One of the top names that dominate the storage device industry is Western Digital or WD. The brand is a very reliable name, especially when discussing performance and quality for hard drives – both external and internal.

The best thing about WD hard drives are their compatibility with a wide array of systems. They are especially compatible with NAS systems. This means that it works great with AV storage applications, such as the Windows Media Center.

Additionally, the WD is considered one of the top brands for hard drives because of the added feature that allows it to perform optimally in arduous conditions. WD has developed a feature that protects the data while it is being transferred. It even has a management support system that ensures the data is not corrupted in the event of power interruptions.

It works efficiently while reducing the drive’s power consumption, temperature, and noise. A majority of its products are more expensive than the regular hard drive products, but you can rest assured that your files are protected and the transfers will only take a few minutes.

Internal Hard Drive Comparison: Best Hard Drive for the Money

Internal Hard Drive Comparison Best Hard Drive for the Money

The importance of hard drives in carrying out the functions of a modern computer cannot be overstated. Hard drives are indeed a key component in all computing tasks. If you are one of the tech-savvy people who constantly need to update their networks and need as much data storage space as possible, then you need a good working hard drive with a large storage capacity.

Aside from programmers and web developers, a lot of people find convenience in using internal and external hard drives in their tasks. Photographers, videographers, and video editors, for example, need a device with a large storage capacity because most of the files they’re dealing with consume a lot of storage space.

Now, there are two types of hard drives as far as function is concerned – the Hard Disk Drive and the Solid State Drive. The main difference between the two is that HDD have the classic spinning metal disks while the SDD have a flash memory, which is what USB thumb drives have. To further discuss their advantages and disadvantages, SSD boots faster than the HDD and uses less power.

On the other hand, HDD has a bigger storage capacity compared to an SSD. Also, in terms of longevity when it comes to its read-and-write cycle, the HDD has a longer lifespan. Plus, HDD is more affordable and readily available.

Hard Disk Drives are more popular and you can easily get them at any tech store. There are hundreds of makes and models you can choose from; all have unique features that are exclusive to a certain brand. For those who don’t have a true grasp of what an internal hard drive is for, picking any item on the shelf is good enough. But for those who understands the real function of a hard drive, selecting a product requires a good amount of time to determine which products will tailor-fit their computing needs.

Here are the technical specifications that you must focus on to determine the best internal hard drive for the money:

Storage Capacity

A hard drive is used mainly to store digital information, and the most important feature that you need to check when choosing one is the storage capacity. 1 TB hard drives are readily available on the market today, but you can get one that has up to 8 TB capacity.

Data Transfer Rate

Aside from storing data, hard drives are used for sending and receiving digital information. It is important to have one that has a fast transfer rate so it can read or write from the disk in the shortest possible time.

Rotational Speed

The platter inside the drive spins and it’s measured in rotations per minute. Faster rotation means higher transfer rate.

Average Access Time

This is basically the amount of time that it takes for the disk to send out the information required after receiving the command to transfer data.

There are other features that need to be considered when choosing the right internal hard drive, but the ones listed above are the main features. With that in mind, here’s a compilation of the best sellers this year to get you started on your hard drive shopping.

1. HGST Deskstar NAS 3TB Internal Hard Drive Kit

The Deskstar comes from a long line of top-notch quality and innovative disk drives intended for storing, processing, managing, and protecting all kinds of digital information. It has an expanded storage capacity and increased speed. Considering the fact that it’s made by one of the most reliable companies in the industry, you can guarantee that this drive will last more than its expected lifespan. See our review.

2. WD Blue 1TB Desktop Hard Drive

When it comes to performance, no one will question what the WD Blue HDD can do. WD is known for its excellent quality and top-notch performance. This 1 TB desktop drive is considered as a benchmark for all standard hard drives on the market.

It was designed to provide convenience in all data transfer and file storage tasks. And, its compatibility with a wide array of computing systems makes it the best desktop hard drive for those who use different operating systems.

3. Seagate 1TB Desktop HDD Internal Bare Drive

Needless to say, Seagate is a trusted brand in the industry. For years, it has produced excellent quality storage devices that cater to personal and commercial data storage needs, which is why it is one of the most highly recommended hard drive products on the market. Read our review of this drive.